Cristek connectors and harness assemblies, micro D and D-Subminiature

Control Products Inc. waterproof switches, thermal switches and linear position sensors for hydraulics

Staco Switch - pushbuttons, data entry keypads and keyboards

Switch and Control Panel Knobs

Flat Panel Display Systems and Laser Rangefinders

Wall Industries

Cole Instrument Group



 

LEDS

High Bright LED Lighting

New design approach using only white LEDs filtered for all the desired colours
  • Much higher light intensity - 250% brighter than the above version
  • Full sunlight readability per M22885
  • Full sunlight readable/ANVIS compatible
  • Additional colours: White & Blue
    ANVIS Blue; White; Green A
  • Voltage dimming option available on 28 VDC versions
  • May be either sinking or sourcing
Advantages when used for A/C cockpit updates and retrofits
  • Dims at the same rate as incandescent devices
  • A plug in replacement for incandescent pushbuttons
  • Improves system reliability
  • Reduces faceplate temperature dramatically
  • Increases display contrast ratios

Multi-chip LEDS

Broad Range of T-1 3/4 MFG (Midget Flange Base) LEDs
  • Long Life
  • Even Lighting
  • Lower Current Consumption
  • Increased Resistance to Failure by Shock and Vibration
  • Substantially Less Heat when compared to Incandescent Lamps
LED illumination is available for lighted display pushbutton switches and indicators. Suitable as direct replacement for T-1 3/4 incandecent lamps, brightness of the LEDs is sufficient for most lighted legend applications. They are particularly well suited for use in interior areas with normal ambient lighting conditions. These multi-chip LEDs contain four or six high intensity light emitting diode chips, providing a luminance approaching or equaling that of equivalent incandescent miniture lamps. Their solid state construction greatly reduces the danger of vibration and shock as a failure mode.

Available in choice of voltages, 6 VDC through 28 VDC, the LEDs have built-in resistors and protective diodes. The 6 VDC LEDs have four chips; the 12 VDC and 28 VDC LEDs contain six chips. All units are available with either positive or negative polarity. In addition to bright, even lighting, further advantages include greatly extended service life...100,000 hours...lower current consumption, and substantially less heat when compared to incandescent lamps.

Voltage is marked on the side of the LED shell. Units are coded for identification of polarity...positive or negative, and for identification of the lighted color...red, yellow, or green.
 


For more information please contact your local IPP office